FREE INTERNET BROWSING

FREE INTERNET BROWSING
JB Technology – All Rights Reserved
Internet Browsing TM is the copyright property of JB Technology. You do not have the right to resell or commercialize this software by any means. Every unauthorized infringement is an offence which is punishable under law.

Disclaimer: In as much as we are confident that this system of browsing the internet is completely legal and free and efficient, we will not take responsibility for the motive and the use of this service. Kindly note that by using this product and service, you are taking full responsibility for your actions and therefore responsibility for actions taken are not transferable to us. We also do not accept responsibility for the efficiency in the speed of connection nor the downtimes as this is beyond our jurisdiction.

Introduction
Free Internet Browsing is a completely free and easy way of connecting to the internet without paying monthly subscription. You’ll be able to connect to the internet through your mobile GPRS enabled phone. Your GPRS enabled phone actually connect to a proxy server which enables you to access the internet gateway directly. This connection is completely seamless. Overtime, we have discovered that this connection is best connected to Glo Mobile as Glo network does not time out like other network connection.
(PLEASE: DO NOT SEND US SUPPORT EMAILS TO EXPLAIN WHY THIS SERVICE DOES NOT WORK WITH MTN AND CELTEL)
Without wasting so much time, let us in a step-by-step guide go through the process of connecting your computer to the internet through your mobile phone. Please kindly make sure that you follow this guide to the letter before calling us for support. This is very essential. Enjoy the Rollercoaster Ride

REQUIREMENTS FOR SETTING UP A SYSTEM
1. A Bluetooth GPRS Enabled Mobile Phone (Most Camera Phones are GPRS enabled)
2. A GLO GPRS enabled mobile Sim card (You can enable your Glo sim card by simply calling GLO mobile customer service on 121. Instruct them about this and it will be done)
3. A PC Suite (This software comes with your mobile phone if you purchase it new. If you don’t have it, simply visit any software shop and request for DKU5. Request for the specific software of your phone e.g. Nokia, Motorola, and Sony Ericcson.)
4. A Freedom Software. ( This has been attached to your email address)
5. Mozilla Firefox (Also Attached to your email address)
6. Download Accelerator ( This has also been attached to your email address) With all these, you are set to connect your computer to the internet. Therefore let us proceed;

STEPS TO SETTING UP THE SYSTEM
Let us begin with the setting up of your system; First of all, you’ll need to sign up for a username and password at the FREEDOM Website. Simply go to www.your-freedom.net and click on “Sign Up”. This will bring a sign up page as detailed below;Fill the form with your details inclusive of your valid email address( please note that an activation link will be sent to your email) After that, go through to your email and click on the activation link that was sent to you( See pix below). This link will enable you to be able to use your freedom username and password that you registered. Please keep this USERNAME AND PASSWORD as you’ll need this later in the course of installation.

• At this point, insert your Glo Sim Card into your gprs enabled phone. Please make sure that your Glo sim card is gprs enabled. If it is not, simply call Glo customer line on 121 and they’ll take you through the process. (Please do not call us to help you activate this, as we believe that anyone can do it their self- Thank You)
• Connect your GPRS enabled phone to your computer’s USB port through the accompany cable and follow the next step below
Another cable is in the picture below:

STEP 1:
Get the software for your phone (Either PC suite/ or DKU 5) and install it on your system. There are various installation process depending on the mobile phone you use. For Nokia Mobile Phones, all you have to do is to install your Nokia PC suite and the modems install automatically. This is the same for sony ericson mobile phones as well. If you are making use of DKU-5 cable, simply install the Modem software that came along with your DKU cable and this should be just fine. ( If you have problems, simply refer to your mobile phone’s manual for Modem Installation. Immediately you finish installation, go to step 2

STEP 2:
Install your freedom software
• Download the freedom software from the attached email to your desktop
• Double click on it to open
• Click on the next set-up
• Click next six times as it appears
• Then click finish
When you click finish, your “FREEDOM” icon will appear on your desktop

Configuring your FREEDOM software
1. Click on the “FREEDOM” icon on your desktop
2. Cancel the Welcome configuration wizard. On the menu bar, click on port. When port opens, click on sock 4/5 and web proxy.
3. Click on message on the menu bar. When it opens, click auto scroll and change minimum level from info to DEBUG.
4. Click status on the menu bar. When it opens, click on configure.
5. When configure opens, type ems01.your-freedom.de in the Address bar. And change the protocol from http to HTTPS.
NOTE: 443 WILL APPEAR AUTOMATICALLY IN THE PORT BAR.
6. Still on the configure page, (See pix above) click on the following and leave others blank.

• Automatically select the best server
• Automatically connect on startup
• Reconnect after server shut down
• Do not show pop-up windows
• Redirect socks 4/5 DNS to freedom
• Enable encryption
• Enable re-keying

7. At the right hand side of the configure page, type : 10000000 (ten million) in the space in front of initial post size and type 20000 (twenty thousand) in the minimum post size.
8. With the aforementioned done, click on the account information on the menu bar, type the username and the password you signed up on the freedom website (The username and password you saved earlier on).
9. Click on proxy settings and type proxy address: 10.100.98.22 and proxy port: 3130
10. Click Save and Exit
You are now ready to be connected to the internet

TO MAKE YOUR BROWSING FASTER.
1. Install the Mozilla Firefox browser that was sent to you as part of the package. ( If you have mozilla on your system already, then don’t bother installing again).
2. When you finish installation, double click on the Mozilla icon on your PC Desktop as shown below:
3. click on tools on the menu bar, on the dialogue, click on options
4. click on advance, and then you click on network

Step 5
1. Click on settings
2. Click manual proxy configuration and edit the following detail.
HTTP: localhost port: 8080
SSL PROXY: localhost port:8080
FTP PROXY: localhost port:8080
Gopher PROXY: localhost port:8080
After Editing these details, click OK
After you are able to finish this configuration, Simply start your PC suite/ DKU modem Software, and go to “Connect to the Internet” This will connect your PC to the internet through your mobile phone. Please note that the picture below is an illustration and is meant for Nokia Phones. If you are using a different phone modem, kindly check with your mobile phone’s Manual (that came originally with your phone) on how to connect your computer to the internet through your mobile phones Modem.
When you are connected to the internet, simply type your desired website address into your browser (e.g. www.letmedoyourwork.com ) and you’ll be able to connect to the internet. We are quite confident that you’ll not be charged for browsing the internet with this method. At this point, enjoy every bit of your browsing experience and make sure that you use it legitimately as this is very important. Thanks for subscribing to Seamless Free Browsing at NJ technology. For more enquiries and support, simply send an email or call the person that sold the software and manual to you. Do have an enjoyable and seamless internet browsing experience.
Regards,
THE END
© Copyright 2010 – JB Technology